On unpacking you'll find all of the components come in their own protective compartment. These include a SkyRC E4 balance charger, USB cable for the firmware updates, propellers, various tools and a high capacity 11.1v 5400Mah LiPo battery for a longer flight time even with the extra weight of the gimbal and camera.
The first thing that we noticed was the beautiful pearlescent white large fuselage and larger landing skids to accommodate the built in gimbal. Just like the standard version of the FreeX, the FPV version is nearly ready to fly out of the box. The gimbal is already pre-attached to the quadcopter so all we needed to do was insert our camera, attach the propellers, insert the battery, do the compass collaboration and we were ready to go!
Turning the quadcopter on, we are met with the flashing lights under the propeller arms, the usual 2 lights – indicating you are pointing north and that you are connected to the GPS. The gimbal comes to life and a quick click of the button on the gimbal and it is collaborated and is ready to shoot.
The gimbal that comes pre-attached to the quadcopter is a 2 Axis full CNC brushless gimbal. It supports most small cameras including the SJ cameras that we sell and the GoPro 3 upwards (please note that the camera is not included with the quadcopter). The camera is so very easy to attach – just loosen the 2 Allen key screws, slide the bar, fit the camera, tighten the screws, plug in and away you go.
Now to the next most important component - the awesome FPV transmitter with full telemetry on-screen display, built-in 5.8Ghz video receiver, and a 95mm LCD monitor!
With the transmitter you are able to control the gimbal with the circular pad enabling you to take photos and videos from better angles. Other features include headless mode capabilities, being able to support a memory card of up to 32GB so that you can store the video footage and the ability to take videos and take photographs at a flick of a switch.
On the awesome OSD LCD display screen, it tells you an abundance of information including; flight time, distance flown, speed, current height, direction and longitude and latitude!
The FPV version of the FreeX also has all the features found on the standard version such as fully automatic flight including position hold, altitude hold and compass mode. For full information click here to see the standard version.
Included In The Box:
- FreeX Quadcopter
- FreeX FPV transmitter (with LCD Display) and Receiver
- 5.8G Video Tx and Rx (with Antennas)
- Onetouch 4 Flight control board
- FREE-X GPS module
- 2 Axis full CNC Brushless Gimbal (Supporting GoPro, SJ4000 and Xiaomi Camera )
- 11.1V 5400mAh LiPo battery
- E4 Charger
- Aluminum case
|Radio Equipment||2.4 GHz|
|Motor / Engine||Brushless|
Especificaciones del transmisor
5.8 G Video Tx y Rx
Especificaciones Pantalla LDC
|Required To Use||8 pilas AA para el transmisor de radio|