Raptor Radio Controlled Electric Truggy - Brushless Version

Rating:
95% of 100
Special Price €259.99 Regular Price €289.99
Out of stock
SKU
A2012T
With a big brushless motor and 11.1V Li-Polymer battery the 1:10 scale Raptor brushless rc truggy model is ridiculously quick and at an amazing price! The Raptor is a high performance, high speed racing machine. The 4WD system with front and rear differentials evenly distributes the massive power.
SAVE 10%

This is the Raptor. It's a third of a meter wide, it's got a powerful brushless motor, and it's incredibly fast making it one of our most awesome radio controlled cars. Fitted with massive wheels, with high grip tyres, suitable for use either on or off road, this Raptor will go pretty much anywhere, and it doesn't hang about. To cushion the blows it is equipped all around with oil filled shock absorbers, and responsive and articulate wishbone suspension technology. Performance isn't all that this truggy offers though, it has a prepainted shell which is exclusive to Nitrotek, and is ready to run straight from the box - just take the Raptor brushless RC truggy out, charge its battery, place 8AA batteries in the handset and you're ready to go! With that big brushless motor and 11.1V Li-Polymer battery these models are ridiculously quick and at an amazing price!

The Raptor truggy is a high performance, high speed speed machine. With its unique truggy tyres and low centre of gravity design the models performs both on and off the tarmac. The 4WD system with front and rear differentials evenly distributes the massive power to the wheels making the Raptor a race winner.

The special motor in this model is much quicker than the motors found in other models. Because it is brushless it also means the motor needs no maintenance and can handle a lot more power being pumped into it. So to take full advantage of that the standard 7.2v Ni-Mh batteries that are found in most radio controlled cars kits has been replaced with a very powerful 11.1v lithium battery along with a balanced lithium battery charger which is needed for these special batteries. The brushless RC truggy comes fully built with everything you need to get racing apart from eight normal AA batteries for the radio handset. This is a high spec racing model that at full speed requires some real skill to control it. It is therefore recommended for ages 14+.

A2012T-V1 Box

 

1:10th SCALE MODEL
This 1:10th scale truggy measures in at 410mm x 260mm x 140mm (length, width, height)

A2012T-V1 Dimensions

 

4WD SHAFT DRIVE SYSTEM WITH DIFFERENTIALS
This model has a 4 Wheel Drive system with a strong aluminium drive shaft evenly transferring the power from the rear to the front. The 4WD system gives better off road ability and better handling. These hobby grade RC cars also feature working front and rear differentials that further improves handling.

Above

 

HIGH SPEED BRUSHLESS MOTOR
Brushless motors are much faster than standard ones making this model very fast. The speed controller features its own dedicated cooling fan to keep it at peak operating temperature.

Motor

 

OIL FILLED SHOCKS WITH SWAY BARS
Both the tension and angle of the shocks can be adjusted to suit your driving preference and terrain. Sway bars are fitted as standard to further improve cornering.

Suspension

 

11.1v LITHIUM BATTERY
This model comes complete with a 11.1v lithium battery and charger. These batteries release the full potential of the brushless setup to give the fastest possible speed. The battery box size is adjustable.

Battery

 

SLEEK BODY SHELL
The truggy white body shell comes pre-painted and pre-cut.

A2012T-V1 Body Shell

 

2.4GHz RADIO
All new 2.4GHz radio technology is used. This is more reliable than the old FM equipment and allows mulitiple RC cars to be used in the same area without interference.

Transmitter

 

ALUMINIUM CHASSIS
A solid blue aluminium chassis with all countersunk screws to keep the base perfectly flat.

A2012T-V1 Chassis

More Information
Model Scale1:10
BuildRTR
Drive4WD
For TerrainOff Road
Radio Equipment2.4 GHz
TypeTruggy
Motor / EngineBrushless
Specifications
  • Width: 330MM
  • Height: 140MM
  • Length: 410MM
  • Wheelbase: 270MM
  • Gear ratio: 8.95:1
  • Wheel dia.: 110*55MM
  • Ground clearance: 36MM
  • Radio: 2.4Ghz Pistol Type
  • Battery: 11.1V 1800mah Li-Polymer
  • Motor: Brushless 2080kv
  • ESC: 60A Brushless
  • Scale: 1:10
Features
  • 1/10 Scale brushless powered car
  • 4WD Shaft drive system
  • Extreme power brushless motor
  • Oil-filled shocks
  • Powerful Li-Polymer battery with balanced charger
  • Front and rear bevel differentials
  • Brushless 60A ESC
  • Pre-painted exclusive body shell
  • High quality 2.4Ghz CE approved radio system allows multiple users in the same area
Required To Use
  • 4x AAA Batteries
Spares Link/spare-parts/acme-racing/acme-raptor-truggy-spare-parts.html

DELIVERY INFORMATION

Delivery cost and time will depend on the size of the items ordered

SPARE PARTS

They will take between 2-5 working days. The cost depends on the number of parts and the size.

Germany: €3.70 - €7.40
Spain: €7.40 - €13.30
France: €7.40 - €11.80
Ireland: €7.40 - €8.90
Italy: €7.40 - €13.30
Netherlands: €5.95 - €8.99
Portugal: €7.40 - €10.30
Denmark: 42kr. - 72kr.
Sweden: 52.80kr - 105.60kr

NORMAL SIZED MODELS

This does not include very large items such as electric bikes, large scooters and quad bikes. Delivery will take 2-5 working days.

Germany: €7.40
Spain: €9.99
France: €8.99
Ireland: €7.40
Italy: €9.99
Netherlands: €8.99
Portugal: €9.99
Denmark: 72kr.
Sweden: 105.60kr

VERY LARGE ITEMS

Very large items such as electric bikes, large scooters and quad bikes. Delivery will take 2-5 working days.

Germany: €49.90
Spain: €49.90
France: €49.90
Ireland: €49.90
Italy: €49.90
Netherlands: €49.90
Portugal: €49.90
Denmark: 499kr.
Sweden: 499kr.

Only registered users can write questions. Please Sign in or Create an account
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
To Top